Harness Pieces!!! :)

The next part is making the extra part of the harness is basically making the extras that are attached to the harness there are 4 different parts that need to be made.

The difficult part was getting the measurements right before drawing up the patterns but luckily for for I have all the measurements sorted, all you have to do is draw it out for yourself! (Although you may find you want to adjust the height or width of the back piece.

What I find is best is to draw them out on paper so you have a permanent pattern you should, using a pen or pencil, be able to draw the pattern straight out onto the fabric side of your leatherette. If you can't read my hand writing or there is something you don't understand in the pictures, comment below. 

With this piece the strips should incoroprate the width and length of the belt you intend to use. As this attaches to your belt.

 This is the piece of the back harness, this is only half of what it should look like as I couldn't fit the while thing on the paper (size A3) so what you need to do is draw out this as then just flip it over so the 10.5cm lines meet and draw it out again simple!